Skip to content
Getting rid of mold stains from window surface using ULV500 Mold Remover.

How to Get Rid of Mold from Surfaces

The worst thing about molds is that they can grow everywhere. While there are a few kinds of molds that are very useful to people, others can be very harmful to crops, the respiratory system, and the quality of the structures. Here’s a simple guide on how to get rid of mold from surfaces.

Getting rid of mold stains from window surface using ULV500 Mold Remover.

There are various kinds of molds in the atmosphere. Most of the regular kinds of molds found in houses are buildup.

A buildup is a surface form that fills in warm, soggy spots “likes restroom” and on textures and books put away in sodden cellars. Mold begins as a dim of the fine white province, and it will turn dark or earthy colored if not eliminated instantly and regularly equivalent to soil gathering.

To check if the surface is covered with a buildup or simply soil, touch the stain with a q-tip dunked in a family unit chlorine fade. If the stain disappears a few minutes, it’s a buildup.

Natural ways to eliminate molds

You may not readily notice the developing dark molds at home, as they tend to fill dim spots. When molds begin to spread, it becomes even more challenging to get rid of them.

There are a few different ways used to eliminate molds. The ideal approach to forestall shape is by cleaning consistently and limiting dampness. Draining shower entryways, fixing holes, and keeping tile grout clean are some of the effective ways to keep mold under control.

Whether you’re often cleaning and sterilizing, molds can sneak in and make themselves at home.

Several companies promise the complete elimination of molds with their services. However, a considerable lot of them contain unforgiving synthetics that might be as unsafe as the mold itself. The good news is that there are effective means to get rid of molds without resorting to poisonous synthetic substances.

Tips to get rid of molds on different surfaces


Molds become more stubborn when left untreated for a long time. However, if you catch and remove them early on, there might be a way for you to save fabric.

Use the hottest water recommended for the type of fabric and add disinfectant. You may also try to create an oxygen bleach solution with water if there are remaining stains.


Molds from leather objects, such as furniture, shoes, etc., should always be removed outside. Removing them from inside your home will only increase the risks of having more molds indoors.

Using white vinegar, wipe the surface, and then lather it with soap and water. Use a soft cloth to dry it and then allow it to air dry completely. For best results, use a leather conditioner after the whole process.


Mold destroys paper more than it does fabric. When left untreated, molds will eventually damage your paper. If these are important documents and expensive books, you would want to try ways to save them.

Before trying to remove the molds, make sure the paper is completely dry. You may try to air dry it under the sun or use a sealed container with silica gel. You can also use cornstarch to absorb moisture.

Once dry, use a paintbrush or any soft cloth to brush away molds from the paper gently. Protect the sheets with wax paper in between. Use hydrogen peroxide to wipe down every page. Make sure every page is completely dry before moving on to the next ones.

Exterior walls

Chlorine bleach is proven effective in treating most surfaces, especially concrete. However, it would help if you were careful when using them outside as they could harm your plants and grass.

You should first make sure to protect your plants with a piece of clothing. Using your bleach and water solution, wet the mold’s area and leave it on without rinsing. You can use a garden sprayer to avoid contact with the chemical. If stains persist, try scrubbing the area more and use more solution until it improves.

Interior walls

For porous surfaces, use detergent together with your regular bleach and water solution. Use one-part detergent for every mix of bleach and water.

Be careful not to oversaturate the surfaces. Remember not to rinse the surface. Just allow it to air dry completely.

Recommended products to kill molds

Hydrogen peroxide

Hydrogen peroxide is an antifungal, antiviral, and against bacterial arrangement found in most medication cupboards. It is shown to be very effective against mold.

You can use it on different surfaces such as kitchen machines and counters, restroom apparatuses and tubs, hard deck, and even certain divider surfaces.

  • Pour a 3% hydrogen peroxide into a shower bottle.
  • Test an unnoticeable zone of surfaces first to forestall staining or harm. Immerse the rotten surface and leave it for 10 minutes.

Finally, clean the zone with enough force to eliminate dark shapes and stains. When the surface is free from lingering mold and stain, wipe it dry.


White vinegar has long been proven to clean, aerate, and purify effectively. In the same way, it can also kill 82% of mold types, including dark form. You can even use it on both permeable and non-permeable surfaces.

You can safely use it on most surfaces, and its scent disappears rapidly.

  • Empty undiluted white vinegar into a splash bottle. Since white vinegar contains just about 20% acidic corrosive, adding water makes it less viable.
  • Splash the vinegar onto the rotten surface and leave for 60 minutes.
  • Then, clean the zone off with water and permit the surface to dry. Any smell from the vinegar should clear inside a couple of hours.

Essential oils

Essential oils have made fragrance-based treatment a household staple. However, these regular mixes can accomplish such a great deal more.

Tea tree oil is a bug repellant, germ-free, and deodorizer - and it’s perhaps the most secure strategy to get rid of molds. Tea tree oil is a known fungicide that tidies up mold rapidly, and it keeps most extras from returning.

  • Mix one teaspoon of tea tree oil with one cup of water in a splash jug and shake vivaciously to mix the water and oil.
  • Splash the area where the molds are, leave it to dry for 60 minutes.
  • Wipe away with a microfiber material or dry towel.
  • Make a point to wear protective gloves since certain individuals locate that essential oils can bother their skin.


Lemons are an excellent deodorizer, germ-free, fade, stain remover, and cleaner - and they can likewise eliminate dark shape.

The high convergence of corrosive in lemons separates molds, making it simple to eliminate and give up a disinfectant surface. Its magnificent citrus fragrance adds even more power to its ability to kill molds.

  • Juice three-to-five lemons into a cup and pour over the rotten area.
  • Let it sit for five minutes and wipe the surface with a moist towel afterward.
  • You can reapply and scour the surface to eliminate the stubborn stain.

NaturalClean Mold Remover

ULV500 Mold Remover is a natural and organic solution to getting rid of mold on surfaces. It virtually eliminates mold and the stain it leaves behind. This powerful cleaner can penetrate deep into the surface for thorough stain removal.

ULV500 Mold Remover.

Unlike most mold solutions, this mold remover leaves no musty, damp odor. ULV500 Mold Remover works powerfully against deep-seated stains that linger between bathroom tiles, in grout lines, under the sink, and on shower doors. It’s a ready-to-use formula that works powerfully against stubborn mold and stains.


It is always better to choose natural options in contrast to synthetic-based mold removers. A considerable lot of them are just as powerful against molds without compromising the safety and health of your loved ones.

Molds may be stubborn and challenging to get rid of, but consistent cleaning, coupled with the right solutions, gets the job done.

Previous article How to Build a Campfire: Easy-to-Follow Guide
Next article How to Decorate a Vase Water Fountain