1 (800) 613-6889
PetraTools HD3000 Starter Guide
Yes, please be sure to run the unit with warm soapy water for 20-30 minutes prior to initial use, also ensuring that all connections are secure and tight to prime the unit.
"Leaking commonly occurs when the nozzle pieces have not been fully
tightened. Connections can come loose over time, so check your nozzle connections and re-tighten before each use and whenever you switch out your nozzles. Be sure to wrap all the connection points with provided plumbers tape you'll find in your accessories bag, whenever using liquid under pressure, there is a potential for leaks. If trouble persists, don't hesitate to reach out to support at 1-800-613-6889 for additional help."
One of the reasons could be a clog in the hose, try detaching the hose from the body and see if you get anything out of the base and check to see if the hose is clear by creating a cyphon and clearing any potential blockage. If the pump/motor is running but nothing is coming out, there may be a pressure issue, make sure the lid is sealed tightly so that proper pressure is able to build within the tank. If trouble persists, don't hesitate to reach out to technical support at 1-800-613-6889 Ext. 1 M-F 8 am - 4pm EST
How long should I charge my new sprayer?
Yes, you can use the small black knob to control the pressure and the fine mist brass nozzle will add to your options as well
Cleaning the electric HD3000 is easy! You just have to wash it with warm, soapy water. Run about a half a tank through the sprayer when you are done using it for the day.
Still having problems? Contact us
Weekdays 8AM – 5PM EST
411 N East St, Carlisle PA 17013